ProTeam 1 Inch Pure Tabs

0.5 oz per 15,000 gallons of water every 2-4 days.

Amount needed will vary based on water temperature and bather loads

Initial Start Up:

1. For each 15,000 gallons of pool water place 0.5 oz. in the skimmer basket.
2. Allow 6 to 12 hours for chlorine residual to equalize. Initial treatment will last from 2 to 4 days depending on water temperature and flow rate through the skimmer.
3. Chlorine residual should be maintained between 1.5 and 2 ppm as determined by a suitable test kit.
4. If daily testing indicates the chlorine level to be low, increase the number of tablets in the skimmer basket.
5. If daily testing indicates the chlorine level to be higher than 2.0 ppm, reduce the number of tablets accordingly.

Routine Maintenance:

1. Once every two weeks a shock dose of 5 ppm chlorine should be made to prevent the development of resistant species of algae.
2. This product is not recommended for this purpose.
3. Stabilized granular used at a rate of 1/2 lb. per each 10,000 gallons of water will satisfy the requirement when used in conjunction with this product.
4. Keep pH of water between 7.2 and 7.6 as determined by a suitable test kit.
5. Reentry into treated swimming pool is prohibited above levels of 3 ppm of chlorine.

Trichloro-s-Triazinetrione: 99%, Other Ingredients: 1%