Leisure Time Spa 56 Chlorine Granules

Start Up:

1/2 oz per 500 gallons of water.

Maintenance:

1/2 oz per 500 gallons of water as needed.

Superchlorination:

1 oz per 500 gallons of water.

Start Up:

Add 1/2 oz. of this product per 500 gallons of water prior to entering spa. Wait 5 minutes then check chlorine residual. Residual chlorine must read between 2 and 3 ppm. If it does not, additional dosages of material should be added until it does. Once the chlorine residual is established in the 2 to 3 ppm range, the spa or hot tub may be entered.

Maintain:

This product should be added daily or as necessary to maintain 2 to 3 ppm residual chlorine. Frequent checks should be made of residual chlorine using a reliable test kit. This product should be broadcast over the surface of the water and allowed at least 5 minutes mix time before testing.

Heavy bather usage or the use of oils or lotions may increase the chlorine demand resulting in the need for more frequent checks of chlorine residual.

pH should be monitored with a reliable test kit and maintained at 7.2 to 7.8 for clean water. pH can be decreased by adding a suitable agent such as sodium bisulfate or increased by adding Leisure Time Aklalinity Up.

Superchlorination:

It is good practice to superchlorinate every 2 to 4 weeks. To superchlorinate, add 1 oz. of this product for each 500 gallons of water. Thoroughly clean spa, vacuum and cycle through filter. Resume program when chlorine residual reads 2 to 3 ppm.

Sodium Dichloro-s-triazinetrione Dihydrate: 99%, Other Ingredients: 1%, Available Chlorine: 55%