Natural Chemistry Spa Purge

Spas/Hot Tubs

Add the entire contents of the Spa Purge bottle to the spa or hot tub's water.

Jetted Tubs

Add half of the Spa Purge bottle to the jetted tub with the water an 1" above the jets.

Spas/Hot Tubs

1. Remove cartridge filter elements.
2. With spa water temperature at 95ºF or higher and circulation running, add entire contents of bottle to spa water.
3. Run jets for a minimum of 5 minutes Note: If foaming becomes excessive, turn jets off. Some foaming is expected during the purge process.
4. Maintain water temperature at 95ºF and allow spa to circulate overnight with jets off.
5. Drain and rinse/clean out the surfaces of the spa. Refill the spa water and reinstall the filter elements.
6. Proceed with normal spa maintenance.

Jetted Tubs

1. Fill tub with hot water 1" above the jets.
2. Add 1/2 bottle of Spa Purge.
3. Turn jets on for 5 minutes (some foaming will occur).
4. Turn jets off and let sit for at least 5 hours.
5. Turn jets on to flush the system.
6. Drain tub & clean surface as needed.