Before starting up a new Nature2 cartridge, clean debris and algae out of the pool and pool equipment.
Balance pool water before installing Nature2 cartridge. ph should be 7.4-7.8, calcium hardness between 200-400 ppm, total alkalinity between 80-150 ppm. Consult with your Nature2 Dealer for specific water balance instructions.
Install the Cartridge:
- Install the cartridge into your pool filter after water is balanced.
- Superoxidize the pool water with chlorine according to manufacturers instructions to burn off contaminants and active cartridge. Initial superoxidation with chlorine is required to burn off contaminants and activate cartridge.
- Run the circulating pump either - 24 hours a day for 4 days, maintaining 1-2 ppm free chlorine throughout, or 6 hours per day for 14 days, maintaining 1-2 ppm free chlorine throughout.
- Let chlorine dissipate to 0.5 ppm once start-up period is completed. Do not enter pool if the free available chlorine residual is over 3 ppm.
