Frog Leap Depth Charge
For Spring Start Up:
- After balancing the pool water and inserting a new Frog Leap Anti-Bac Mineral Pac into the Frog Leap System, insert Frog Leap Depth Charge using the following steps.
- With circulation system off, set control dial to lowest setting and remove the cap to the Frog Leap System.
- Remove caps from Frog Leap Depth Charge with pliers or other suitable tool.
- Turn Frog Leap Depth Charge over so open ends face down
and insert into the center of the Frog Leap Anti-Bac Mineral Pac. The ends of the pac will align with an L shaped key in the system. DO NOT FORCE.
- Replace cap on the Frog Leap System and set dial setting to 10. Turn on pump and allow 1 hour for the product to slowly dispense into the pool.
- If after 1 hour, the pac still contains some ingredient, re-insert, replace cap and run the circulation for an additional 30 minutes.
- Remove empty Frog Leap Depth Charge and discard or recycle.
- Replace cap on the Frog Leap System and allow at least 15 minutes before inserting any other Frog Leap products.
- Repeat steps 2-8 if additional Frog Leap Depth Charge is needed.
For Winterization:
- Before lowering the water level and discarding used Fro Leap Anti-Bac Mineral Pac, insert Frog Leap Depth Charge using the following steps.
- With circulation system off, set control dial to lowest setting and remove the cap to the Frog Leap System.
- Remove caps from Frog Leap Depth Charge with pliers or other suitable tool.
- Turn Frog Leap Depth Charge over so open ends face down
and insert into the center of the Frog Leap Anti-Bac Mineral Pac. The ends of the pac will align with an L shaped key in the system. DO NOT FORCE.
- Replace cap on the Frog Leap System and set dial setting to 10. Turn on pump and allow 1 hour for the product to slowly dispense into the pool.
- If after 1 hour, the pac still contains some ingredient, re-insert, replace cap and run the circulation for an additional 30 minutes.
- Remove empty Frog Leap Depth Charge and discard or recycle.
- Replace cap on the Frog Leap System and allow at least 15 minutes before inserting any other Frog Leap products.
- Repeat steps 2-8 if additional Frog Leap Depth Charge is needed.
Frog Leap Reveille
For Spring Start Up:
- After balancing pool water and inserting a new Frog Anti-Bac Mineral Pac and Frog Leap Depth Charge into the Frog Leap System, insert the Frog Leap Reveille using the following steps.
- With circulation system off, set control dial to the lowest setting and remove the cap to the Frog Leap System.
- Remove caps from Frog Leap Reveille with a pliers or other suitable tool.
- Turn Frog Leap Reveille over so open end faces down and insert into the center of the Frog Anti-Bac Mineral Pac. The ends of the pac will align with an L shaped key in the system. DO NOT FORCE.
- Replace the cap on the Frog Leap System and set dial to setting 10. turn on pump and allow 1 hour for the product to slowly dispense into the pool.
- After 1 hour, if the pac contains some ingredient, re-insert, replace cap and run the circulation for an additional 30 minutes.
- Remove the empty Frog Leap System and discard or recycle.
- Replace the cap on the Frog Leap System and allow circulation to run at least 15 minutes before inserting any other Frog Leap products.
- Repeat steps 2-8 if additional Frog Leap is required.
For Winterization:
- Before lowering the water level and discarding used Frog Leap Anti-Bac Mineral Pac and after disposing of Frog Leap Depth Charge, run the pool circulation for 15 minutes and then insert the Frog Leap Reveille using the following steps.
- With circulation system off, set control dial to the lowest setting and remove the cap to the Frog Leap System.
- Remove caps from Frog Leap Reveille with a pliers or other suitable tool.
- Turn Frog Leap Reveille over so open end faces down and insert into the center of the Frog Anti-Bac Mineral Pac. The ends of the pac will align with an L shaped key in the system. DO NOT FORCE.
- Replace the cap on the Frog Leap System and set dial to setting 10. turn on pump and allow 1 hour for the product to slowly dispense into the pool.
- After 1 hour, if the pac contains some ingredient, re-insert, replace cap and run the circulation for an additional 30 minutes.
- Remove the empty Frog Leap System and discard or recycle.
- Replace the cap on the Frog Leap System and allow circulation to run at least 15 minutes before inserting any other Frog Leap products.
- Repeat steps 2-8 if additional Frog Leap Reveille is required.
Frog Leap All-Out
Preventative Dosage Rates: Use one Frog Leap All-Out for pools up to 15,000 gallons of water every 3 months. Use two Frog Leap All-Out for pools between 15,000 and 30,000 gallons of water every 3 months.
Treatment Dosage Rates: Use two Frog Leap All-Out for pools up to 15,000 gallons. Use four Frog Leap All-Out for pools between 15,000 and 30,000 gallons of water.
Placement: Turn circulation pump off, turn dial to lowest setting and remove cap from Frog Leap System. If Frog Leap Torpedo Pac is currently being used inside the Frog Leap Anti-Bac Mineral Pac, remove and set aside. Remove cap from Frog Leap All-Out without removing the seal and insert container upside down into the center of the Frog Leap Anti-Bac Mineral Pac pushing down firmly to puncture the seal. Replace the cap on the Frog Leap System. Turn control dial on the Frog Leap System to Maximum, Setting 10 or ON depending on the model and turn pump on for 90 minutes allowing Frog Leap All-Out to circulate through the pool.
Removal: Turn pump off, turn dial to the lowest setting and Remove Frog Leap System cap. Lift the Frog Leap All-Out container up and allow any water in the container to drain through the Frog Leap System before discarding. Note: After discarding Frog Leap All-Out, if water shows more than a hint of blue inside Frog Leap System, replace the Frog Leap System cap, turn dial to maximum, setting 10 or ON and run pump for one minute. Repeat Placement and Removal Instructions if additional Frog Leap ALl-Out is required. Then insert Frog Leap Torpedo Pac following the directions on its label.
