General Precautions:
- This product emits a powerful bromine gas. Do not open container indoors. Hold away from face when opening to avoid breathing fumes.
- Mixing with other chemicals may cause a violent and instantaneous chemical reaction. Do not add this product to water in a pail. Do not add water to this product in a pail.
- Follow label instructions exactly. Do not take advice from others. Do not experiment.
Application:
Before initially using this product in your spa or hot tub you will need to add 1/2 oz of sodium bromide for each 100 gallons of water. The same treatment must be followed each time you drain and refill your spa or hot tub with fresh water. Introduce 3 tablets per 300 gallons of spa water with the use of a floating tablet feeder or automatic brominator installed on the spa equipment. Adjust tablet feeder or brominator to obtain an active bromine residual of at least 2 ppm. Maintain spa by adding 3 tablets per 300 gallons of water every 5-7 days or as needed to maintain an active bromine residual of 2 ppm at all times. Spa water has a tendency to foam and cloud; this is directly proportional to spa use. Cloudiness is due to the accumulation of body fats, oils, and contaminations too small for the filtration equipment to remove, and is linked to rapid escalation of total dissolved solids in the water. To a great extent, defoamers, clarifiers, as well as shock treatments, demineralizers, or sequestering agents can be used to clear the water. When water clarification cannot be achieved, drain, clean, and refill the spa.
