Haviland Durachlor Super Fall Out

For pools with moderate cloudiness, add 8 ounces per 20,000 gallons of pool water with the pump running.

NEVER mix different product together in the same bottle or pail. Though safe for swimmers, avoid pool use immediately after using this product as to not inhibit product performance. Avoid using this product if you DO NOT have the ability to vacuum the pool directly to waste.

1. Make sure cap is on tight and SHAKE THE BOTTLE THOROUGHLY.
2. Adjust total alkalinity to 80-120 ppm and pH between 7.5 and 8.0.
3. Filters with multipart valves: With the pump running and the filter valve in the recirculate position, add this product directly to the skimmer. If you do not have the ability to use recirculate, but can vacuum directly to waste, dilute the recommended amount of product in a pail of 1 to 2 gallons of watering add directly over the surface of the pool water. Always add pool products to water and NEVER add water to pool products.
4. For pools with moderate cloudiness, add 8 ounces per 20,000 gallons of pool water with the pump running. For pools with extensive cloudiness add 16 ounces per 20,000 gallons go pool water.
5. Continuously circulate the pool water for four hours and shut down pool pump afterwards. Avoid pool activities and maintenance until all directions are complete.
6. All suspended particles will fall to the bottom of the pool after 8 to 12 hours.
7. With the filter ninth waste position, VERY SLOWLY vacuum the material collected on the pool bottom. Initial vacuuming and additional vacuuming may be necessary. Additional settling may occur up to 3 days after the application.